Pressure Water Pipes

PVC-U PIPES FOR COLD POTABLE WATER CU\SS 4, 6, 10 and 16 BAR

We produce a range of PVC-U pipes strictly in accordance with TS EN ISO 1452-2-3 and

ISO standards on dimensions, materials and workmanship. The pipe is manufactured from 100% virgin unplasticized polyvinyl chloride compound (PVC-U).

No re-worked material is used. The pipe is produced under an ISO 9001:2008 Quality System.

Our pipes are produced in a range of pressure ratings 4,6,10 and 16 Bar. Our pipes are produced in a range of nominal pressure (PN) at 20°C. The appropriate derating factors should be applied for working pressures when subjected to higher temperatures. The nominal outside diameters and nominal wall tickness are based on an overallservice (design) coefficient C=2,5 from 50 mm to 90 mm. and C= 2 from 110 mm to 400 mm.

Featuresof Plastic PVC-U pipes;

Fully compliant with TS EN ISO 1452-2-3.

Resistant to a wide range of chemicals and corrosion.

High Impact Resistance

Quality assured and tested to the strict specifications of the Standard for dimension compliance, impact resistance, burst pressure, flattening and joint tightness.

Smooth internal bore for low friction losses.

Compatible with the full range of PVC-U Pressure fittings.

Long service life under a wide range of conditions.

Will not support combustion.

The pipe is used in a wide range of applications, such as: 

Irrigation systems main/sub-mains.

Chemical industrial processes.

Pressurized water supply (city town, industrial, home, commercial.)

Drainage/sewage applications.

General services, domestic water, A/C drainage.

Ducting, electrical, telecommunication.

İndustrial process plants oil/gas/petrochemical.

Desalination processes, brine disposal, mineral water

Specifications of pressure pipes of Plastic 

Raw material : PVC-U Standarts : TS EN ISO 1452-2-3 Color      : Grey

Dimensions : Pipes produced in ranging from 0 50 mm.

Up to 0 400 mm diameter.

Normally supplied in 6 m length Others can be supplied on request.

Connection : Pipes are supplied in plain end solvent

weld or rubber ring joint for ali size

Tests                                                      Resul ts

Density : 1350 < P < 1460 kg/m3

Opacity : Max. % 0,2

Vicot softening temperature : > 80CC

Resistance to dichloromethane : Resistant

Quantity of vinilcloridmonomer : < 1 ppm

Resistance of int. Pressure : Two times of nominal pressure

İmpact strength : TIR < %10